Air Classifier

Product Details:

·       Suitable for precise classifying of dry micro material.

·       Classifying efficiency (extraction ratio) is 60% to 90%

·       Can be used with Ball Mill, Roller Mill, Raymond Mill to form closed circulation.

·       Dust emission rate is <20mg/m³ and noise is <76dB(A) for the system equipped with silencer under negative pressure.

·       Key components like inner liner, classifying wheel can be made of ceramic such as aluminium oxide, zirconium oxide or silicon carbide.

·       Explosion proof design is available.

FL/ITC Vertical Air Classifier (Single Classifying Wheel):

·       Consist of vertically installed single wheel.

·       The linear velocity of vertically installed classifying wheel can be up to 100m/s.

·       Speed of wheel can be controlled by Variable Frequency Drive. Particle size can be adjusted accordingly.

·       Wear resistant SKF bearings used.

·       D50: 2μm - 45μm is achievable.

Application:

Widely used in chemical industry, minerals (especially suitable for calcium carbonate, kaolin, quartz, talc, mica and other non-metallic mineral product classifying), metallurgy, abrasives, ceramics, refractory materials, medicines, pesticides, food, health products, new materials etc.

FL/ITC Vertical Air Classifier (Multiple Classifying Wheel):

·       Consist of vertically installed multiple classifying wheel for high capacities.

·       Handling capacity is higher compared to single wheel classifier.

·       Speed of wheel can be controlled by Variable Frequency Drive. Particle size can be adjusted accordingly.

·       Wear resistant SKF bearings used.

·       D50: 2μm - 45μm is achievable.

Application:

Widely used in chemical industry, minerals (especially suitable for calcium carbonate, kaolin, quartz, talc, mica and other non-metallic mineral product classifying), metallurgy, abrasives, ceramics, refractory materials, medicines, pesticides, food, health products, new materials etc.

Additional Information:

• Delivery Time: 90 days

Product Details:

Air Classifier works with set of Cyclone Separator, Bag Filter and Suction Fan to form a complete classifying system. Material goes from the bottom part of air classifier up to the classifying chamber by air flow from the suction fan. The classifier wheel with high speed rotation creates strong centrifugal force to separate coarse and fine powder. Qualified fine powder goes through the wheel vane into the cyclone or bag filter, while coarser entering fine powder loses its speed and falls down along the wall of chamber to the secondary air inlet. The secondary air flow disperses further and separates coarse and fine powder. Fine powder goes up to the classifying chamber for further classifying, while coarse powder falls down and is discharged from the bottom outlet.

·       Suitable for precise classifying of dry micro material.

·       Classifying efficiency (extraction ratio) is 60% to 90%

·       Can be used with Ball Mill, Roller Mill, Raymond Mill to form closed circulation.

·       Dust emission rate is <20mg/m³ and noise is <76dB(A) for the system equipped with silencer under negative pressure.

·       Key components like inner liner, classifying wheel can be made of ceramic such as aluminium oxide, zirconium oxide or silicon carbide.

·       Explosion proof design is available.

FW/HTS Horizontal Air Classifier (Single Classifying Wheel):

·       Consist of horizontally installed single wheel.

·       The linear velocity of horizontally installed classifying wheel can be up to 100m/s.

·       Speed of wheel can be controlled by Variable Frequency Drive. Particle size can be adjusted accordingly.

·       D50: 1.5μm - 25μm is achievable.

Application:

Widely used in chemical industry, minerals (especially suitable for calcium carbonate, kaolin, quartz, talc, mica and other non-metallic mineral product classifying), metallurgy, abrasives, ceramics, refractory materials, medicines, pesticides, food, health products, new materials, etc.

FW/HTS Horizontal Air Classifier (Multiple Classifying Wheel):

·       Consist of horizontally installed multiple classifying wheel.

·       The linear velocity of horizontally installed classifying wheel can be up to 100m/s.

·       Speed of wheel can be controlled by Variable Frequency Drive. Particle size can be adjusted accordingly.

·       D50: 1.5μm - 25μm is achievable.

Application:

Widely used in chemical industry, minerals (especially suitable for calcium carbonate, kaolin, quartz, talc, mica and other non-metallic mineral product classifying), metallurgy, abrasives, ceramics, refractory materials, medicines, pesticides, food, health products, new materials, etc.

Additional Information:

• Delivery Time: 90 days

Product Details:

Series: FL Multiple Stage Classifier in Series
Other Details:
Adopting German Technology, Combined With Domestic Realities, Continuous Technological Innovation And Upgrading, Vertical Impeller Structure, Suitable For 100-6000 Mesh (150μm-2μm).
Features:
Low Investment, Energy Saving, Automatic Plc Programming Control, Easy To Adjust, Easy To Operate.

Applicable:
Widely Used In Chemical Industry, Minerals (Especially Suitable For Non-mineral Materials Classifying, Such As Calcium Carbonate, Kaolin, Quartz, Talc, Mica), Metallurgy, Abrasives, Ceramics, Refractory Materials, Medicines, Pesticides, Food, Health Products, New Materials, Etc. Industry.

Unique AdvantagesTo Achieve Ultrafine, High Purification, Functional, Intelligent, Carbon Reduction, Energy Conservation And Environmental Protection Is The Mission And Responsibility That Time Has Given Us.Vertical Impeller
Vertical Impeller, Multi-rotor To Achieve Large Capacity, Vertical Single Rotor Structure, Can Meet Different Product Requirements, High Efficiency, Investment Savings.
Skf Bearing
Skf Bearings Make The Drive Run More Smoothly.
High Precision Assembly
High-precision Assembly, Special Bushings Are Safe, Labor-saving And Reliable.
High Energy Efficiency
The Air Screen Type Secondary Air Design Has High Energy Utilization Rate, Helps The Material Flow, And Improves The Efficiency Of Powder Selection.

Working Principle
Creating The Future Of Advanced Materials With Powder Technology. The Classifier And Cyclone Separator, Dust Collector And Induced Draft Fan Form A Classifying System.
Under The Action Of Fan Suction, The Material Is Moved From The Lower Inlet Of The Classifier To The Classifying Zone With The Ascending Airflow. Under The Strong Centrifugal Force Generated By The High-speed Rotating Turbine, The Materials Are Separated And The Fine Particles Which Meet Size Requirements Through The Classifier Impeller Gap Into The Cyclone Separator Or The Dust Collector, The Coarse Particles Entrained Part Of The Fine Particles Collided With The Wall And The Velocity Disappeared, Descending Along The Cylinder Wall To The Secondary Air Outlet, And The Coarse And Fine Particles Were Separated By The Strong Washing Action Of The Secondary Air. The Fine Particles Rise To The Classification Zone For Secondary Classifying, And The Coarse Particles Are Lowered To The Discharge Port For Discharging.

Additional Information:

• Delivery Time: 90 days